Content Summary

The process of cleaning immersion blenders can be challenging and time-consuming, but it is a necessary task for maintaining the cleanliness of your appliance and making sure it keeps doing its job.

In this blog post, we will share with you step-by-step instructions on how to clean an immersion blender in various ways, and the do's and don'ts when cleaning the appliance.

A Handheld Blender With Attachments

👉
Need to clean the countertop blender? Check out our guide here.

How To Clean An Immersion Blender

1. Cleaning When Taking It Apart

Before you clean your hand blender, carefully read the instruction manual. If you don't have a manual, look it up online.

  • Step 1: Fill a bowl or sink with warm water and add dishwashing soap.
  • Step 2: Dip the blending wand into the warm soapy water and turn on the blender for a few seconds. This will allow the soapy water to clean the blades and shaft. Avoid submerging the motor block!
  • Step 3: Unplug the blender from the power source.
  • Step 4: If your immersion blender comes with detachable accessories, remove the blending wand from the motor unit, to clean it separately.
  • Step 5: Rinse the blending wand thoroughly with clean water.
  • Step 6: To remove any remaining food particles, grease or stubborn residue, use a soft sponge or small brush to scrub it off.
  • Step 7: Dry the blender with a clean cloth or let it air dry.
  • Step 8: Use a damp cloth to clean the motor block.

2. Cleaning With A Dishwasher

Not all immersion blenders are dishwasher safe, so ensure that you consult the instruction manual before putting any blender parts in the dishwasher. Never ever put the motor block in the dishwasher: this may well be fatal.

  • Step 1: Remove all detachable accessories.
  • Step 2: Place the blending wand and detachable accessories in the top rack of the dishwasher.
  • Step 3: Select a light cycle or rinse cycle to avoid damaging the blades according to the instruction manual.
  • Step 4: Remove the blending wand and accessories from the dishwasher when done.
  • Step 5: Dry them with a clean cloth.
  • Step 6: Clean the motor block with a damp cloth.

3. Other Methods

Remember: never put the motor block in a container with water or liquid. This may turn out to be fatal. Clean it separately with a damp cloth.

Using vinegar & baking soda

  1. Fill a container with warm water.
  2. Mix a tablespoon of baking soda and a cup of vinegar to form a paste.
  3. Let the solution sit for 10-15 minutes.
  4. Dip the wand into the solution, and turn the blender on for a few seconds.
  5. Rinse with water to remove the paste.

Using lemon juice & water

  1. Fill a container with hot water.
  2. Squeeze half a lemon into the water and let it sit for 5-10 minutes.
  3. Dip the wand into the solution, and turn the blender on for a few seconds.
  4. Rinse with water and let the wand dry.

A Stick Blender With Attachments

👉
Related Reads:
- What Is An Immersion Blender Used For
- How To Use An Immersion Blender
- How Does A Countertop Blender Work
- How To Use A Countertop Blender

Cleaning An Immersion Blender FAQs

Here are some commonly asked questions and our answers about cleaning an immersion blender:

How often should I clean my immersion blender?

It is recommended to clean the immersion blending wand and blades right away after every use, as food residue and grease can get stuck quickly.

Is it safe to put the immersion blender in the dishwasher?

In any case, never put the motor block in the dishwasher. Not all immersion blenders are dishwasher safe. Check the instruction manual before putting them in the dishwasher. This will effectively destroy your blender.

Can you submerge an immersion blender?

An immersion blender consists of two parts: the wand with the blades, and the motor block.

You should never submerge the motor block in water or any other liquid. Doing so can damage the electrical components and cause a safety hazard.

So if you need to clean your immersion blender, wash the two parts separately. The wand and blades may be dishwasher safe, although I prefer to wash them by hand. Use a damp cloth to clean the motor block

What is the black residue in my blender?

The black residue in your blender may be caused by a buildup of grease or dirt on the blades.

  • Fill a bowl or sink with warm water and add dishwashing soap.
  • Dip the blending wand into the soapy water and turn on the blender for a few seconds.
  • Unplug the blender from the power source.
  • Detach the blending wand from the motor unit.
  • Use a soft sponge or brush to scrub off any grease or stubborn residue.
  • Dry the blender wand and blades with a clean cloth or let it air dry.

Why is there brown stuff coming out of my hand blender?

The brown stuff coming out of your hand blender may be caused by the buildup of oils and residue from previous use.

  • To clean this, unplug the blender from the power source. Detach the blending wand from the motor unit.
  • Soak the blending wand and blade in a mixture of warm water and dish soap for 10 minutes.
  • After that, use a soft brush to scrub away any remaining residue.
  • Rinse everything off with warm water and let it air dry completely before reassembling and using.

How do you clean the inside of a stick blender?

Assuming you mean the inside of the blender wand, not the motor block:

  1. To clean the inside of a stick blender, you will need to detach the blending wand from the motor unit.
  2. Then, fill a bowl or sink with warm water and add dishwashing soap.
  3. Dip the blending wand into the soapy water and turn on the blender for a few seconds.
  4. This will allow the soapy water to clean the blades and shaft.
  5. Rinse the blending wand thoroughly with clean water and use a soft sponge or brush to scrub off any grease or stubborn residue.
  6. Dry the blender with a clean cloth or let it air dry.
  7. If you want to clean the motor block, use a damp cloth. Do not open it; this is a job for a tech professional.

Can a lemon clean a blender?

A lemon can be used to clean a blender wand. This method is an effective and natural way to clean your blender wand without using harsh chemicals. It can also help remove any lingering odors from the blender.

  • To do this, remove the blender wand from the motor block.
  • Fill a container with warm water and squeeze half a lemon into it.
  • Then, let it sit for 5-10 minutes and add the blender wand.
  • Now, carefully attach the wand to the motor block, turn on the blender and blend for a few seconds.
  • Use a soft sponge or brush, to scrub off any remaining grease or residue.
  • Finally, unplug the blender, detach the blender wand, rinse it with water and let it dry.

Can baking soda clean the blender?

Baking soda is an effective and natural way to clean an immersion blender wand.

  • To do this, fill a container with warm water and mix a tablespoon of baking soda and a cup of vinegar to form a paste.
  • Let the solution sit for 10-15 minutes and add the blender wand.
  • Now, attach the wand to the motor block, and turn on the blender for a few seconds.
  • Use a soft brush or sponge to remove any remaining grease or stubborn residue.
  • Finally, rinse with water to remove the paste and let it dry.

Cleaning An Immersion Blender After Every Use

Tips & Tricks

Do's

  • Unplug the blender before cleaning it.
  • Allow the blender to cool down before cleaning it.
  • Make sure that no water enters the electrical motor unit when cleaning.
  • Clean detachable accessories separately.
  • Clean the blender after each use.
  • Use warm and soapy water for maximum effectiveness.
  • Be careful when cleaning the sharp blades, do not touch the blades.
  • Let the blender air dry or clean it with a dry cloth.

Don'ts

  • Do not immerse the blender motor block in water.
  • Before cleaning, detach both parts.
  • In other words, do not clean the blades while they are still attached to the motor unit.
  • Do not clean the blender head with abrasive materials.
  • Do not use harsh chemicals, or abrasive cleaners that can damage the blades.
  • Do not use a dishwasher to clean the immersion blender wand and blades if these are not dishwasher safe.
  • Do not skip reading the manual.

How to easily deep clean an immersion blender | Start Simple End Strong

Need our suggestions to pick the best hand blender for your kitchen? Check out our blog post below. We’ve reviewed the top-rated immersion blenders, so you can find the right one quickly without spending more time researching.

Best Immersion Blender Hand Held Food Processor You Must Own
These hand held or immersion blenders that also function as hand held food processors will make your day. Check out our top 7 picks!
CatchyFindsJane Vo
7 BLENDERS IN THE SPOTLIGHT

Cleaning an immersion blender is easy once you understand the process. Ensure that you follow these instructions to keep your immersion blender in top condition for years to come.

Happy blending!

Catchy Finds